pH Meters

• Simultaneous display of pH and conductivity
• 2 independent channels to prevent interference between probes
• Data logger with autosave/print options
• Additional modes for resistivity, salinity, TDS and mV
• Storage of up to 500 readings (250 for each mode)
• Probes sold separately

• Intuitive operation
• Ergonomic design
• Waterproof
• Large display
• Automatic and manual endpoint recording
• Acoustic endpoint signal
• Visual endpoint signal

• Simple menu
• ISM® Compatible
• uFocus™
• T-pad
• Endpoint signalling
• IP67 - (weatherproof)
• Outdoor mode (maximises battery life)
• Sunlight-proof

• Intuitive touchscreen operation
• Efficient workflow support
• Security and compliance - 21 CFR part 11 support, GLP and Password protection
• Memory size: 250 analyses (20.000 data points)
• Data Transfer by PC, Printer or USB stick
• Probes not included

• Simple menu
• T-pad
• ISM® ready
• IP67 - weatherproof and robust design
• 12 languages
• Sunlight-proof
• StatusLight™
• Weatherproof USB

• Waterproof - IP67 rated
• CAL Check™
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approx - 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• ±0.002 pH accuracy
• Specialised electrode for testing of mash and wort during the brewing process
• Increased traceability
• Versatile data logging
• Superior field usability
• pH 4 & 7 buffer sachets

• The electrode FC2023 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Din connection
• Replaceable Electrode
• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording

• Simultaneous pH and temperature measurements on a large dual-line LCD Display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2323 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2423 dedicated pH with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator

• Clogging Prevention System (CPS™)
• Automatic Temperature Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• 8 hour battery life
• Dual USB ports
• 5.5 inch display
• 3.5 mm probe input
• Capacitive touch keypad

• Repeatable/Efficient - the instrument's auto stable feature will hold stable measurements on the display, resulting in precise, repeatable, and error-free measurements.
• Convenient/Reliable - simple calibration with automatic buffer recognition.
• Calibration is stored in memory and the electrode efficiency can be viewed at any time.
• Measures pH, ORP (mV) and temperature
• Simple 1, 2, or 3 point calibration
• Large, high contrast, LCD display; displays pH/mV and temperature simultaneously
• AUTOLOCK mode holds stable measurements on the display
• Accepts U.S. (7.00, 4.01, 10.01) or NIST (6.86, 4.00, 9.18) buffer sets
• Automatic/manual temperature compensation*
• Automatic lock mode and end point sensing feature will lock in stable measurements
• BNC input allows for any pH or ORP electrode with BNC to be connected*
• 1 year warranty on instrument

• Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)  
• 0.01 pH resolution
• Offset and average slope display 
• Automatic / manual temperature compensation and temperature calibration function
• ORP calibration option
• °C & °F temperature readings
• Auto log data; built-in memory can store up to 500 data
• Auto shut-off (programmable: up to 30 minutes)
• Auto stable, auto hold, and real time measurement modes
• Calibration alarm (programmable: up to 90 days)
• Built-in electrode holder allows 2 electrodes to be attached
• Monochrome LCD with white LED backlight: 50 x 50 mm
• Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
• Powered by 2 x AA batteries
• Packaged with electrode and calibration solutions in carrying case
• 3 years meter warranty

• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

Replacement Gel probe for pH1000A meter

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.

Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.

• Pocket-sized pH meter, ideal for everyday use
• Automatic calibration feature
• Easy to read 8 mm LCD display
• Display hold function
• Temperature operating range 0 to 50℃

• Probe Dia.12 x 120mm
• Ideal for pH measurement of liquids and semi-solids
• Easy to use re-calibration feature
• ±0.05 pH accuracy
• 2-year guarantee
• Operating Temperature 0℃ to 50℃

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap: Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• High pH accuracy of ±0.01
• Self-diagnostic messages for easy troubleshooting 
• Measures ORP in addition to pH and Temperature
• Rubber Boot protects gainst knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

• Rubber Boot protects against knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Splashproof & Shock-Resistant Built with shock-resistant
• ABS plastic and protected by an IP54-rated housing against accidental splashes
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

• pH / mV / Temperature Best value for an IP67-rated waterproof pH meter
• Large, three-line LCD – View pH or mV measurement with temperature and % slope
• Built-in memory function – Stores up to 150 measurements along with temperature
• Auto buffer recognition – Automatically identifies USA, NIST or DIN buffer sets for rapid calibration
• Power with AA batteries or use optional AC adapter for benchtop measurements
• Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
• Selectable ºF/ºC – Choose units to best fit your application
• Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• % slope and temperature displayed with each measurement
• Built-in stand – Ideal for easy benchtop or long-term use
• Wall-mount option – Ideal to save on bench space
• Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
• Compatible with pH electrodes having a BNC connector

• pH / mV / ION / Temperature
• Backlit, rugged waterproof meter is ideal for any environment
• Durable waterproof and dustproof design with IP67 rating
• Large, backlit display – View measurement with temperature and % slope
• Grip-Clip™ – Quickly and easily secures the pH electrode to your beaker or container
• Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards
• Intuitive, user-friendly icons – Electrode status displays pH slope
• Store up to 500 data sets – Easy USB or RS232 output with optional data cables
• Built-in real-time clock stamps stored data and calibration data with time and date – Meets standards for GLP (Good Laboratory Practices)
• Built-in stand with wall-mount option – Allows for easy benchtop measurement or storage
• Compatible with pH, ORP or ISE electrodes having a BNC connector

• pH / mV / Conductivity / Total Dissolved Solids / Salinity / Temperature
• PC 450 accepts a single pH/Con probe or separate pH and conductivity probes
• Durable waterproof and dustproof design with IP67 rating
• Switch between pH, mV, conductivity, TDS and salinity with a press of a button
• Large, backlit custom display – Lets you view measurement with temperature
• Grip-Clip™ – Quickly and easily secures separate pH and conductivity electrodes simultaneously to your sample container or beaker
• Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards you
• Auto buffer recognition – Automatically identifies the correct pH buffer for rapid calibration
• Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
• Intuitive, user-friendly icons – Electrode status displays pH slope or cell constant
• Auto-range conductivity from 0 to 199.9 mS in five ranges – With up to five calibration points
• Selectable cell constant – 0.10, 1.00 or 10.0
• Adjustable temperature coefficient – From 0.00 to 10.00 % per ºC
• Conductivity-to-TDS factor – Adjustable from 0.40 to 1.00
• Selectable ºC/ºF – Choose units to best fit your application
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• Store up to 500 data sets; easy USB or RS232 output with optional data cables
• Built-in real-time clock stamps stored data and calibration data with time and date –
• Meets standards for GLP (Good Laboratory Practices)
• 500 hours battery life or use an optional universal power adapter
• Built-in stand with wall-mount – Allows for easy benchtop measurement and storage

• Large, easy-to-read display
• Ready indicator let you know when readings are stable
• Up to 5-point calibration with auto-buffer recognition
• Non-volatile memory holds up to 100 data points
• Integral electrode holder
• Use in all types of food processing
• Dual Measurement Includes Temperature Display With All Readings
• 100 Point Memory
• Detachable Electrode Holder
• Compact Footprint Saves Valuable Bench Space
• Custom Setup Options
• Hold Function And Stability Indicator
• 3-Year Warranty

• Large screen in a compact footprint
• Meter accepts pH and Redox electrodes, in addition to Conductivity/TDS whereit's like having four meters in one!
• Up to 5-point push-button calibration
• Selectable cell constant
• Auto-ranging across 5 Conductivity ranges
• Easy interchangeability of probes
• Non-volatile memory holds up to 100 data points
• Integral electrode holder
• Dual Measurement Includes Temperature Display With All Readings
• Detachable Electrode Holder
• Compact Footprint Saves Valuable Bench Space
• Custom Setup Options
• Hold Function And Stability Indicator
• 3-Year Warranty

• Up to 6-point calibration with auto-buffer recognition
• Quick, easy electrode diagnosis with multiple pH slopes and offset display
• Calibrate with up to 5 custom pH buffers where use any pH values that are 1.0 pH unit apart
• Cal-due alarm
• Auto-logging function for convenient continuous monitoring
• Password protection for setup and calibration
• All measurements include temperature display
• Up To 500 point memory with date time stamp for GLP
• Output data to printer or PC
• Detachable electrode holder
• Compact footprint
• Custom setup
• 3-Year warranty

• pH / mV-Redox-ORP / ION / Conductivity / Total Dissolved Solids / Salinity /Resistivity / Temperature
• Choose auto-calibration with preset values for quick easy calibration, or manual multi-point calibration for greater accuracy
• Easy standardisation with auto-standardisation feature – detect the exact cell constant value of your electrodes with the press of a button
• Up to 6-point calibration with auto-buffer recognition
• Includes high performance 4-cell Conductivity probe
• Quick, easy electrode diagnosis with the effective cell constants display
• Non-volatile memory holds up to 500 data points – time and date-stamped for GLP compliance
• Bi-directional RS232 for easy data transfer to computer
• Cal-due alarm – no more out-dated calibrations!
• Auto-logging function for convenient continuous monitoring
• Limit alarm alerts when reading falls out of range
• Password protection for setup and calibration
• All Measurements Include Temperature Display
• Up To 500 Point Memory With Date Time Stamp For GLP
• Output Data To Printer Or PC
• Detachable Electrode Holder
• Compact Footprint Saves Valuable Bench Space
• 3-Year Warranty

• HI-2202 edge®blu pH Bluetooth® Meter with HALO™ HI-11102 gel-filled Bluetooth electrode
• Two USB ports
• Store up to 1000 log records of data
• GLP Data of the last calibration you perform is stored
• Capacitive touch keypad
• Easy to read 14 cm LCD with wide 150∞ viewing angle
• CAL Check™ technology to warn you if the electrode bulb is not clean or if the buffers are contaminated during calibration

• Simultaneous, pH, EC/TDS and temperature measurements on a large three-line LCD display
• Selectable temperature unit
• pH electrode condition display
• mV of pH measurement for electrode check
• Last calibration points pH and EC
• HI-12886 dedicated pH/EC/TDS/temperature probe
• Probe quick connect system
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12963 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV or pH measurement for electrode check
• HI-12923 dedicated pH probe with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH and temperature measurements on a large dual-line LCD Display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit ℃ or ∞F
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-629113 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67