Clifton from Nickel-Electro is a well-established family owned business with over 60 years experience in the design and manufacture of laboratory equipment.
Nickel Electro 15lt Drying Ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5℃ to 300℃ with timer functions.
These Ovens can run at set temperature immediately, use a run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
Nickel Electro 32lt Drying Ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5℃ to 300℃ with timer functions.
These Ovens can run at set temperature immediately, use a run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
Dimensions - External: 362(w) x 332(d) x 290(h)mm / Internal: 325(w) x 300(d) x 150(h)mm
Water level: Minimum and maximum water levels are governed by the constant level which maintains the water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Nominal Tank Capacity: 14 Litres
Temperature Range: Simmer to Boiling @ 100℃
Temperature control: Featuring an energy regulator that controls the amount of boiling from a gentle simmer to a vigorous boil
Water Level Alarm: Features low liquid level float device, heating automatically suspended
Nickel Electro 56lt Drying Ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5℃ to 300℃ with timer functions.
These Ovens can run at set temperature immediately, use a run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
Dimensions - External: 362(w) x 332(d) x 290(h)mm / Internal: 325(w) x 300(d) x 200(h)mm
Water level: Minimum and maximum water levels are governed by the constant level which maintains the water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Nominal Tank Capacity: 18 Litres
Temperature Range: Simmer to Boiling @ 100℃
Temperature control: Featuring an energy regulator that controls the amount of boiling from a gentle simmer to a vigorous boil
Water Level Alarm: Features low liquid level float device, heating automatically suspended
Nickel Electro NE8 15 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.
Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5℃ to 100℃. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.℃℃
Nickel Electro 112lt Drying Ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5℃ to 300℃ with timer functions.
These Ovens can run at set temperature immediately, use a run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
Dimensions - External: 538(w) x 332(d) x 290(h)mm / Internal: 500(w) x 300(d) x 200(h)mm
Water level: Minimum and maximum water levels are governed by the constant level which maintains the water level during boiling. Using standard laboratory tubing, connect the bottom outlet of the constant level to a regulated water supply/tap and adjust to supply a slow feed of water while maintaining boiling and this will automatically maintain a safe water level. The side outlet acts as an overflow to a sink or drain.
Nominal Tank Capacity: 28 Litres
Temperature Range: Simmer to Boiling @ 100℃
Temperature control: Featuring an energy regulator that controls the amount of boiling from a gentle simmer to a vigorous boil
Water Level Alarm: Features low liquid level float device, heating automatically suspended
Nickel Electro NE8 32 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.
Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5℃ to 100℃. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.℃℃
Designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath
Painted surfaces feature "anti-bacterial technology" which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments
Water level maximum: 130mm (shelf fitted working depth 115mm)
Capacity: 4 Litres
Temperature Range: Ambient +5℃ - 99℃
Temperature control: Digital, LED display showing actual or set temperature, resolution 1℃
Sensitivity: 0.2℃
Uniformity: 0.1℃
Heater Power: (220-240V)400 w
Dimensions: External: 332w x 185d x 290h mm / Internal: 300w x 150d x 150h mm
Designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath
Painted surfaces feature "anti-bacterial technology" which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments
Water level maximum: 130mm (shelf fitted working depth 115mm)
Capacity: 8 Litres
Temperature Range: Ambient +5℃ - 99℃
Temperature control: Digital, LED display showing actual or set temperature, resolution 1℃
Sensitivity: 0.2℃
Uniformity: 0.1℃
Heater Power: (220-240V) 800 w
Dimensions: External: 332w x 270d x 290h mm / Internal: 300w x 240d x 150h mm
Nickel Electro NE8 112 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.
Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5℃ to 100℃. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.℃℃
Designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath
Painted surfaces feature "anti-bacterial technology" which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments
Water level maximum: 130mm (shelf fitted working depth 115mm)
Capacity: 14 Litres
Temperature Range: Ambient +5℃ - 99℃
Temperature control: Digital, LED display showing actual or set temperature, resolution 1℃
Sensitivity: 0.2℃
Uniformity: 0.1℃
Heater Power: (220-240V) 1000 w
Dimensions: External: 361w x 332d x 290h mm / Internal: 325w x 300d x 150h mm
Designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath
Painted surfaces feature "anti-bacterial technology" which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments
Water level maximum: 130mm (shelf fitted working depth 115mm)
Capacity: 22 Litres
Temperature Range: Ambient +5℃ - 99℃
Temperature control: Digital, LED display showing actual or set temperature, resolution 1℃
Sensitivity: 0.2℃
Uniformity: 0.1℃
Heater Power: (220-240V) 1500 w
Dimensions: External: External: 538w x 332d x 290h mm / Internal: 500w x 300d x 150h mm
6 Litre Heated, Timed, Ultrasonic bath, with drain outlet
Dimensions - External: 310w x 160d x 270h mm / Internal: 300w x 150d x 150h mm
Temperature Range: 30℃ to 80℃ in 5℃ increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Ultrasonic Effective Power: 150W
Ultrasonic peak power: 600W
Ultrasonic operating frequency: 37kHz
Supplied with a lid and basket.
Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.
30 Litre Heated, Timed, Ultrasonic baths, with drain outlet
Dimensions - External: 570w x 350d x 320h mm / Internal: 500w x 300d x 200h mm
Temperature Range: 30℃ to 80℃ in 5℃ increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Ultrasonic Effective Power: 300W
Ultrasonic peak power: 1200W
Ultrasonic operating frequency: 37kHz
Supplied with a lid and basket.
Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.
Dimensions - External: 332w x 185d x 290h mm / Internal: 300w x 150d x 150h mm
Water level: Maximum 130mm (shelf fitted working depth 115mm)
Nominal Tank Capacity: 4 Litres
Brimful Capacity: 6 litres
Temperature Range: Ambient +5℃ - 100℃
Temperature alarm: Under/over temperature alarm is automatically set 4?C above set point
Temperature control: PID Digital, LED display showing actual or set temperature, resolution 0.1℃
Temperature control and run back timer: Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer: Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use
Digital Water Circulator complete with 14 Litre Stainless Steel Tank and Shelf
Dimensions - External: 361w x 332d x 170h mm (Thermocirculator additional 120mm to bath height) / Internal: 219w x 298d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Nominal Tank Capacity: 14 Litres
Temperature Range: Ambient +5℃ - 99℃ Accessory DC1-300 provides cooling from ambient to -20℃
Temperature control: PID Digital, 4 digit LED display, resolution 0.1℃
Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃below set point
Sensitivity: 0.05℃
Uniformity: 0.01℃
Timer: Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure: 10 litres/min - 150mbar Pressure drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports: Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Dimensions - External: 332w x 270d x 290h mm / Internal: 300w x 240d x 150h mm
Water level: Maximum 130mm (shelf fitted working depth 115mm)
Nominal Tank Capacity: 8 Litres
Brimful Capacity: 10 litres
Temperature Range: Ambient +5℃ - 100℃
Temperature alarm: Under/over temperature alarm is automatically set 4?C above set point
Temperature control: PID Digital, LED display showing actual or set temperature, resolution 0.1℃
Temperature control and run back timer: Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer: Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use
Digital Water Circulator complete with 22 Litre Stainless Steel Tank and Shelf
Dimensions - External: 537w x 332d x 170h mm / Internal: 395w x 298d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Nominal Tank Capacity: 22 Litres
Temperature Range: Ambient +5℃ - 99℃ Accessory DC1-300 provides cooling from ambient to -20℃
Temperature control: PID Digital, 4 digit LED display, resolution 0.1℃
Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃below set point
Sensitivity: 0.05℃
Uniformity: 0.01℃
Timer: Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure: 10 litres/min - 150mbar Pressure drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports: Inlet and outlet ports take 4mm bore x 6mm o/d tubing
Dimensions - External: 361w x 332d x 290h mm / Internal: 325w x 300d x 150h mm
Water level: Maximum 130mm (shelf fitted working depth 115mm)
Nominal Tank Capacity: 14 Litres
Temperature Range: Ambient +5℃ - 100℃
Temperature alarm: Under/over temperature alarm is automatically set 4?C above set point
Temperature control: PID Digital, LED display showing actual or set temperature, resolution 0.1℃
Temperature control and run back timer: Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer: Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use
Dimensions - External: 538w x 332d x 290hmm / Internal: 500w x 300d x 200hmm
Water level: Maximum 180mm (shelf fitted working depth 55mm)
Nominal Tank Capacity: 28 Litres
Temperature Range: Ambient +5℃ - 100℃
Temperature alarm: Under/over temperature alarm is automatically set 4?C above set point
Temperature control: PID Digital, LED display showing actual or set temperature, resolution 0.1℃
Temperature control and run back timer: Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer: Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use
Dimensions - External: 660w x 540d x 290h mm / Internal: 620w x 500d x 200h mm
Water level: Maximum 180mm (shelf fitted working depth 55mm)
Nominal Tank Capacity: 56 Litres
Temperature Range: Ambient +5℃ - 100℃
Temperature alarm: Under/over temperature alarm is automatically set 4?C above set point
Temperature control: PID Digital, LED display showing actual or set temperature, resolution 0.1℃
Temperature control and run back timer: Indicator and end message variable, 00:01 to 99:59 [hh:mm], activates at set temperature
Temperature control and delay start timer: Heating commences at a set time in future within 24 hours, useful for pre-conditioning water bath ready for use