Water Testing

• Highly Sensitive test
• Sample Type: Water collected from any source
• Sample Volume: 250 ml
• Sensitivity: 100CFU/L Legionella pneumophila SG1
• Pack Size: 1
• Shelf Life: 18 months from the date of manufacture
• No need to measure or dilute solutions.
• Provides straightforward results, on-site, within 25-35 minutes.
• Regular use increases confidence in Legionella controls.
• Smartphone App reader provides an independent record of results.

• Easy to use
• Optimal documentation of your quality
• Long stable humidity sensor
• Easy data storage at the portable moisture meter
• Analysis on PC and printer available
• Automatic datalog for up to 10,000 logs with measuring point report
• Online-function, Hold function, manual data memory
• Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw value

For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

• Completely portable
• Pocket-sized about 4 x 3 x 1 inch
• Lightweight (4 ounces)
• Runs for about 3 years on 2 button cell batteries
• Easy two-point calibration
• Uses regular AQUALAB cups and standards

• Highly sensitive test
• Sample Type: Water sample obtained by the connection to pipe fitting
• Sample Volume: 250 ml
• Sensitivity: 100 CFU/L Legionella pneumophila sg1
• Pack Size: 5 Tests
• Shelf Life: 18 months from the date of manufacture
• Kit includes pre-filled syringes containing recovery buffer. No need to measure or dilute solutions
• Provides straightforward results, on-site, within 25√¢Äì35 minutes
• Regular use increases confidence in Legionella controls
• Smartphone App reader provides an independent record of results

• 1 s, 10 s, 1 min, 10 min measurement intervals
• 2 input channels for HC2 station probes or HC2 insertion probes can be connected for measurement of water activity, relative humidity and temperature
• AW Quick function for fast measurement results (typically 4-5 minutes)
• Audible alarm to indicate completed measurement
• Saves up to 10'000 data records with %rh, ℃, date and time
• Battery charging function

Training for the Rotronic water activity meters is available for an additional cost. Please contact us for more information on pricing and availability.

• More than 150 programs for routine analysis
• Test kits for every demand: from high precisely to easy, fast and economic
• Storage with Identification Number (ID)
• Data filter for easy selection of data sets
• Electrochemical pH-measurement from pH 0–16.00 (± 0.01) for Standard DIN pH-electrodes
• Automatic Temperature Compensation (ATC)
• Redox Measurement
• 1-3 point calibration with calibration interval setting and calibration protocol
• IR light source acc. to DIN 27027/ISO 7027
• Turbidity measurement range from 0.01-1100 NTU/FNU providing drinking water accuracy
• Longterm stable AMCO Clear Standards with ±1% manufacturing accuracy
• The most versatile colorimeter for field and lab

• Recommended for testing surfaces of:
• - Water tanks and cooling towers
• - Showerheads and sinks
• - Air conditioning units, misters, sprinklers, humidifiers, spa pools and others.
• Sample Type: surface areas
• Sample Area: 10 cm
• Sensitivity: 200 CFU Legionella pneumophila SG1 per swabbed area
• Pack Size: 5 Tests
• Simple to use, no interpretation is required.
• No need to measure or dilute solutions.
• Provides straightforward results, on-site, within 25√¢Äì35 minutes.
• Regular use increases confidence in Legionella controls.
• Smartphone App reader provides an independent record of results.

• Complete set of probe and HW4 including Aw Quick function available
• Measurement range: 0.00 - 1.00 Aw, -40℃ - 85℃
• Wire mesh filter with 20 - 25 √éºm pore size
• USB interface for direct connection to a PC
• Lightweight design
• Complete set of probe and HW4 including Aw Quick function available
• Measurement range: 0.00√¢Ä¶1.00 Aw (0√¢Ä¶100 %RH), -40√¢Ä¶85 ℃ (-40..185 ∞F)
• USB interface for direct connection to a PC (HC2-AW-USB)

Training for the Rotronic water activity meters is available for an additional cost. Please contact us for more information on pricing and availability.

• Ease of use simplifies training.
• Unit-dosed packaging eliminates media preparation.
• No repeat testing due to clogged filters or heterotrophic interference.
• Quality Control (QC) procedure can be done in 15 minutes.

• Detects coliforms and E. coli simultaneously in 18 hours.
• Unit-dosed packaging eliminates media preparation.
• No repeat testing due to clogged filters or heterotrophic interference.
• Quality Control (QC) procedure can be done in 15 minutes.
• 100ml samples, 200 test pack

• Blue fluorescence of wells or vessel indicates a positive result.
• Same familiar platform as the Colilert® test:
• Ready-to-use reagents, no media preparation.
• Convenient unit-dosed packaging.
• No toxic compounds.
• Use with Quanti-Tray® for most probable number (MPN) enumeration.

• Ready-to-use media.
• Simple procedure.
• Most Probable Number (MPN) enumeration.
• Unit-dosed packaging eliminates media preparation.
• Reagent contains no toxic compounds.

• Tear off or Shrink Banded seal
• 120ml or 290ml Capacity
• Available with or without sodium thiosulphate

• Provides easy, rapid, and accurate bacterial counts.
• Detects down to one organism per 100 mL.
• Quanti-Tray and Quanti-Tray/2000 are used when quantifying coliforms, E. coli, enterococci and Pseudomonas aeruginosa.
• The Quanti-Tray System delivers semiautomated quantification methods based on the Most Probable Number (MPN) model.