• Variable shaking speed: 150 to 1200 rpm
• Direct drive mechanism and brushless motor
• Set and display the speed (rpm)
• Holds two or four microtitre plates
• Quick and easy screw fitting of any standard-depth 96-
• Continuous or timed operation, with automatic switch off
• Platform for two microtitre plates supplied as standard. Platform for four plates (MPP-4) available as an option
• Easy-to-use integral electronic timer ensure accurate count-down and repeatability of time-sensitive incubations
• Quick and easy to use screw fittings keep the plates securely in position and allow fitting on any standard-depth 96-
• Easy to read LED display clearly indicates time remaining on timed operations and speed in rpm
• Simple graduated dial to adjust the speed to suit the application: – gentle shaking to ensure that the well contents remain in situ, or more vigorous agitation for effective aeration across the surface area of each well

• Fast heat-up and cooling times
• Temperature setting range +4?C to +100?C
• Temperature control range 15?C below ambient to +100?C
• Shaking speed: 250 to 1400 rpm
• Temperature uniformity ±0.1?C
• Even mixing across the thermoshaker block
• Excellent uniformity across the block
• Clear 16 x 2 character LCD display indicates the set and actual time of operation, mixing speed and temperature
• Digital timer with sound alarm 1 min to 96 hours
• Simultaneous or independent heating and mixing functions

Choice of 5 interchangeable blocks including a block suitable for microplates (sold separately)

• HC18 20 (20 x 0.5 ml and 12 x 1.5 ml microtubes)
• HC32 (20 x 0.2 ml and 12 x 1.5 ml microtubes)
• HC24N (24 x 1.5 ml microtubes)
• HC24 (24 x 2 ml microtubes)
• HC96 (96-well microplate for PCR, 0.2 ml)

Grant Instruments PCMT PLUS provides intensive mixing and temperature control of samples in microtubes or PCR plates. This model differs from the PCMT and PHMT with features including cooling and the ability to control 7 units to a PC via Bluetooth®.

• Temperature setting range: ambient + 25 to 100ºC
• Temperature control range: ambient +5 above ambient to 100ºC
• Temperature stability ±0.1℃
• Shaking speed: 250 to 1400 rpm
• Continuous or timed operation, with alarm buzzer and automatic switch-off facility
• Convenient interchangeable blocks
• 2-line LCD display clearly indicates both set and actual values for temperature, shaking speed and time
• Blocks sold separately

Grant Instruments TS-DW Deep well plate Thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in the design of the thermoshaker allows it to operate as 3 independent devices:

• Incubator
• Plate shaker
• Thermoshaker

Blocks sold separately

Block for one deep-well plate for Axygen® 96/2000ul for Grant Instruments TS-DW Thermoshaker

Block for one deep-well plate for Eppendorf® 96/1000ul for Grant Instruments TS-DW Thermoshaker

Block for one deep-well plate for Starlab® 96/1200ul for Grant Instruments TS-DW Thermoshaker

Block for one deep-well plate for Axygen® 96/600 µl for Grant Instruments TS-DW Thermoshaker

Block for universal platform for Grant Instruments TS-DW Thermoshaker

• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature setting range: 25 to 42℃
• Load up to 2.5 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, temperature and shaking speed using clear 2-line 16 character LCD
• Option of four easily interchangeable platforms for a wide range of different
• Robust, compact construction with clear 7mm thick Plexiglass panels for easy visibility of chamber contents
• Designed for easy assembly/disassembly – easy to move from one location to another
• Platform sold separately

• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature range: 25 to 80℃
• Load up to 8 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Robust, compact construction with stainless steel inside the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, where1 minute to 96 hours or non-stop
• State-of-the-art motor, thermal insulation materials and temperature PID-control decreases the energy consumption
• Platform sold separately

Flat platform with non-slip rubber mat Dimensions: 360 x 400mm for Grant Instruments ES-80 Shaker-Incubator

• The temperature range is from 5 ℃ above ambient up to +80 ℃ with temperature uniformity of ±0.3 ℃ at 37 ℃. The ES-20/80 has a settable speed control range of 50-400 rpm (in 10rpm increments).
• Up to 3 units can be stacked, which enables you to save space. The new clear touchscreen display and simple interface provide a clear and intuitive control of parameters. It also allows data logging, storage and displays over time.
• Bluetooth® connectivity to PC allows for data management, data logging, parameter control and profiling in the included software.
• Available with 5 interchangeable platforms and stacking kits. Must be ordered separately.

Bluetooth adapter for use with Grant Instruments ES-20/82

• Compact, efficient, easy to use
• Flexible for the user by offering a choice of either a single tip operation or a multi-tip option with 8 tips for use on standard PCR type plates.
• The integrated micro-biological filter is hydrophobic and designed to trap any bacteria, viruses or infected particles which may have been present in the aspirated solutions.
• The unit can stand directly inside a workstation, supplied with a slim 12V power cord
• 2 Year warranty

• All in one system with an integrated pump
• 2L autoclavable polypropylene trap flask
• Fitted with hydrophobic microbiological filter
• Vacuum pressure: -200 to -800mbar (adjustable)
• Overflow protection – liquid level sensor detects excess liquid and prevents overflow

Tubing set including all tubing with fittings except filter and aspiration tip for Grant Instruments FTA-1 Aspirators

• Temperature setting range: + 25℃ to 100℃
• Temperature stability ± 0.1℃, temperature uniformity ± 0.2℃ due to the bi-directional heating system (platform and lid)
• Shaking speed: 250 to 1200rpm
• Rapid heat-up
• Continuous or timed operation, with alarm buzzer and automatic switch-off facility
• Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates
• The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation
• Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations
• Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display

• Innovative mixing due to reverse spinning of the sample around its own axis
• Due to innovative mixing technology, it is possible to measure the optical density of the probe in real-time
• Store, display and analyse the data in real-time
• Compact device with a low profile and small footprint for personal application
• Temperature control allows use as an incubator, e.g. for cell growth
• The ability to change parameters such as temperature, RPM and “Reverse-Spin” frequency, achieving consistency and reproducibility of results
• Programmable Cycling/profiling of cultivation parameters such as temperature, RPM, “Reverse-Spin” frequency
• The ability to remotely monitor the process of cultivation while home or using a mobile phone

• Innovative mixing due to reverse spinning of the sample around its own axis
• Due to innovative mixing technology, it is possible to measure the optical density of the probe in real-time
• Software has been developed to store, display and analyse the data in real-time
• Compact device with a low profile and small footprint for personal application
• Temperature control allows use as an incubator, e.g. for cell growth
• Active cooling and temperature profiling via software
• The ability to change parameters such as temperature, RPM and “Reverse-Spin” frequency, allows for achieving consistency and reproducibility of results
• Programmable Cycling/profiling of cultivation parameters such as temperature, RPM, “Reverse-Spin” frequency
• The ability to remotely monitor the process of cultivation while home or using a mobile phone

• Measurement range: 0.5 to 4.0 McFarland units 
• Measurement time : 1 second
• Precision: ±3%
• Readings, conveniently shown in McFarland units, are clearly visible on the bright LED display
• Factory calibrated – retains calibration without power supply
• Can be user calibrated with commercial standards or cell suspensions prepared in the laboratory
• Designed for tubes with an outer diameter of 18mm. 16 mm tubes can also be accommodated by using the optional tube adaptor D-16
• Extremely compact design with small footprint and low profile – fits easily into the smallest workspace

• Measurement range: 0.0 to >7.5 McFarland units (DEN-1B)
• Measurement time : 1 second
• Precision: ±3%
• Readings, conveniently shown in McFarland units, are clearly visible on the bright LED display
• Factory calibrated – retains calibration without power supply
• Can be user calibrated with commercial standards or cell suspensions prepared in the laboratory
• Designed for tubes with an outer diameter of 18mm. 16 mm tubes can also be accommodated by using the optional tube adaptor D-16
• Extremely compact design with small footprint and low profile – fits easily into the smallest workspace
• DEN-1b – either battery powered by 3 x AAA or via external power supply

• Stability of up to ±0.1℃
• Up to 4 years warranty
• No-spill valved front drain
• 3 preset programs
• Large 20-litre tank and accessible bath for immersion of samples
• Environmentally friendly refrigerant
• Robust construction
• 900W of cooling power
• Quiet
• Built-in Britain
• Range of accessory hosing, connectors, software, additional pump and temperature probes available

• Stability of up to ±0.1℃
• Up to 3 years warranty
• No-spill valved front drain
• Programmable
• 12L tank for rapid cool-down
• Robust construction
• 1.1kW of cooling power
• Range of accessory hosing, connectors, software, additional pumps and temperature probes available
• Manufactured in the UK

• Temperature range -10 to 60ºC
• Stability ±0.25ºC
• Choice of models with different cooling power – from 350 to 3000W
• Efficient, reliable and cost-effective alternative to cooling with mains water
• Autotune facility for optimal temperature control performance

Grant Instruments refrigerated immersion coolers consist of a cooling coil connected to a refrigeration unit by a flexible pipe. Both units offer a continuous heat extraction, with the bath control unit controlling the temperature. Compatible with all four Optima thermostatic controllers: T100 TC120, TX150 TXF200.

• Cooling/heating range 0℃ to 100℃ (T100) / -20℃ to 120℃ (TC120)
• Simple, intuitive user interface: dial and two function buttons
• Clear, bright 4-digit LED display
• Visual alarm and low-liquid detection
• 2-point user calibration
• 3 temperature presets
• "T" Models include T clamp

• Cooling/heating range 0℃ to 100℃ (T100) / -20℃ to 120℃ (TC120)
• Simple, intuitive user interface: dial and two function buttons
• Clear, bright 4-digit LED display
• Visual alarm and low-liquid detection
• 2-point user calibration
• 3 temperature presets
• "T" Models include T clamp

• Cooling/heating range -50℃ to 150℃ (TX150) -50℃ to 200℃ (TXF200)
• Icon driven home screen via dial and two function buttons
• Large, bright full colour display
• USB/RS232 interface for programming or data logging
• External probe socket
• 5-point user calibration
• Multi-language options (EN,FR,DE,IT,ES)
• "T" Models include T clamp

• Cooling/heating range -50℃ to 150℃ (TX150) -50℃ to 200℃ (TXF200)
• Icon driven home screen via dial and two function buttons
• Large, bright full colour display
• USB/RS232 interface for programming or data logging
• External probe socket
• 5-point user calibration
• Multi-language options (EN,FR,DE,IT,ES)
• "T" Models include T clamp